This leads to contamination of well water. If the well is rarely used, water stagnates there and becomes turbid, silt accumulates at the bottom. Small debris, dust and dirt get into water as well.
Well water is rarely clear. If it has a greenish tint, that means algae and microorganisms growth.
Water can turn black because of organic compounds. There is too much iron in rusty water: it is unpleasant to drink, it spoils household appliances and leaves stains on your clothes. In addition, water taste and smell can be spoilt with hydrogen sulfide, and sweetish taste appears due to nitrogen compounds.
If you want your water to have a balanced composition, you need to choose the right water filtration system.
This requires a chemical analysis of water from the well. We can perform an in-house analysis of your water, taking into account all important parameters — the number of residents, water consumption rate and the well depth.
AQUAPHOR S comprehensive water treatment systems are suitable for treating cloudy well water. When used together with a coarse mechanical prefilter, they remove suspended particles, iron, manganese, and hardness salts from the water.
It may also be useful to install a UV lamp to eliminate microorganisms and a deep filtration system, such as AQUAPHOR Viking, to remove organic compounds and heavy metals and make the water clear.
Sand can get in a well through cracks in the ring joints. Wells need to be cleaned every year or two, and joints need to be sealed.
If the pump is located too deep in the well, sand can be raised from the bottom - in this case, place it higher. Then you need to put a 50 micron mesh filter and a pre-filter (AQUAPHOR Gross or AQUAPHOR Viking with polypropylene cartridges) — they help remove sand, silt, rust and other particles of 5 microns and large. Pre-filters need to be replaced regularly, and mesh filters need to be rinsed so that they won't cause a significant water pressure drop.
The reason is the oxidation of dissolved iron in the water. To remove iron, we recommend using AQUAPHOR S comprehensive water treatment systems and reverse osmosis systems, which purify water at the molecular level.
Unpleasant odor appears due to decomposition of organic substances or increased content of hydrogen sulfide. To eliminate the problem, we recommend AQUAPHOR Gross or Viking with fine cartridges. Such cartridge is a mixture of activated coconut shell carbon and AQUALEN microfiber. It will filter out heavy metals, organic compounds and trace impurities.
After fine filtration, there will be no more foreign flavours in your water.
The cause of scale in the kettle is hard well water. To soften the water, calcium and magnesium salts need to be removed.
Ion-exchange resins used in AQUAPHOR water softeners are highly effective for this purpose. Comprehensive water treatment systems remove calcium and magnesium salts, iron, and manganese, and also reduce nitrates, chlorine, and high-molecular-weight organic compounds.
EN
RU
EE