WaterBoss Pro 180 is a cabinet water softener that is removing hardness minerals from municipal or well water. It will condition water for up to 70 grains of hardness per gallon (1200 mg/L). Salt and water-efficient.
In addition to softening function WaterBoss Pro 180 is capable of effectively treating a combination of other undesirable water constituents, incliding ferrous (dissolved) iron, dirt, sediment, chlorine, lead in water. Is it is certified for barium and radium 226/228 reduction according to NSF/ANSI Standard 44. With the appropriate filter WaterBoss eliminates dirt, sand, or large particles.
The maintenance is easy: thanks to the built-in self-cleaning filter there is no need to change a filter.
To ensure proper controller settings it is required to get a laboratory water testing. If the water supply contains sand, sulfur, bacteria, iron bacteria, tannins, algae, oil, acid, or other unusual substances, pre-treat the water to remove these contaminants before the water supply enters the appliance.
In addition to softening function WaterBoss Pro 180 is capable of effectively treating a combination of other undesirable water constituents, incliding ferrous (dissolved) iron, dirt, sediment, chlorine, lead in water. Is it is certified for barium and radium 226/228 reduction according to NSF/ANSI Standard 44. With the appropriate filter WaterBoss eliminates dirt, sand, or large particles.
The maintenance is easy: thanks to the built-in self-cleaning filter there is no need to change a filter.
To ensure proper controller settings it is required to get a laboratory water testing. If the water supply contains sand, sulfur, bacteria, iron bacteria, tannins, algae, oil, acid, or other unusual substances, pre-treat the water to remove these contaminants before the water supply enters the appliance.
Features and equipment
Features
— 10
- Maximum Compensated Hardness, gpg 70 (1200)
- Maximum Ferrous Iron Reduction, ppm* 10
- Minimum pH, standard units 7
all specifications
Features
- Maximum Compensated Hardness, gpg 70 (1200)
- Maximum Ferrous Iron Reduction, ppm* 10
- Minimum pH, standard units 7
- Water & Ambient Temperature Minimum-Maximum, °F (°C) 40°-120° (4°-49°)
- Water Pressure Minimum - Maximum, psi (bar) 20/120 (1.4/8.3)
- Maximum Flow Rate to Drain During Regeneration, gpm (L/min) 3.0 (11.4)
- Controller Type 2 Button
- Plumbing Connections (NPT) 1 inch male (MNPT)
- Height, inches (cm) 25.5 (64.8)
- Footprint, inches (cm) 15 x 19 (38 x 48)