AQUAPHOR H20-с — dispenser with osmotic water purification system.
Purifier is suitable for:
Advantages:
Osmotic filtration system with mineralization
Three water tanks with a total volume of almost 10 liters
Low power consumption 650W
The ability to adjust the temperature in the tank with cold and hot water
UV lamp in the storage tank
Protection against overheating and fire
100 gallon pump
Touch control, the service life of filters is shown on the display
Leakage protection
Memory: data is recorded even when there is no power supply
Versatile protection from waterborne threats
Reduces common tap water contaminants including chlorine, organic compounds, heavy metals, rust, phenols.
Chlorine
Hard water minerals
Bacteria and viruses
Nitrates and nitrites
Organic compounds
PRO 1 - Filtration stage 1:
PRE-FILTRATION 2 IN 1
Innovative cartridge combines mechanical filtration up to 10 microns and sorption filtration up to 3 microns
PRO 100 - Filtration stage 2:
MEMBRANE CARTRIDGE
PRO M - Filtration stage 3:
WATER MINERALIZATION
Technical Specifications
| Control type | Touch control |
| Housing material | Plastic / self-extinguishing plastic |
| Water pipes connection | Yes |
| Water level sensor | Yes |
| Water types | Cold, hot, ambient |
| Heating Power | 500 W |
| Hot water tank material | Stainless steel 304 |
| Hot water temperature | 88-93 °C |
| Hot water capacity | 3 L/h |
| Hot water tank capacity | 1.8 L |
| Water supply lock | Yes |
| Cold water tank capacity | 3 L |
| Cooling type | Compressor |
| Cold water tank material | Stainless steel 304 |
| Cold water temperature | 5-10 °C |
| Cooling Power | 100 W |
| Voltage | 220-240 V, 50 Hz |
| Ambient water tank capacity | 5 L |
| LED Display | Yes |
| Overheat protection | Yes |
| Leakage protection | Yes |
| Noise level | 59 dB |
| Inlet Water Pressure | 0.4 Mpa |
| Power cord length | 1.2 m |
| Dimensions (L×W×H) | 321×393×1164 mm |
| Box dimensions (L×W×H) | 465×395×1280 mm |
| Net weight | 24 kg |
| Gross weight | 26.5 kg |
